Ball Valves
DIN 3357-1 Metal ball valves; general requirements and methods of test.
DIN 3357-2 Full bore steel ball valves.
DIN 3357-3 Reduced bore steel ball valves.
DIN 3357-4 Full bore nonferrous metal ball valves.
DIN 3357-5 Reduced bore nonferrous metal ball valves.
Gate Valves
DIN 3352-1 Gate Valves; General Information.
DIN 3352-2 Cast iron gate valves, with metallic seat and inside screw stem.
DIN 3352-3 Cast iron gate valves, with metallic seat and outside screw stem.
DIN 3352-4 Cast iron gate valves with elastomeric obturator seatings and inside screw stem.
DIN 3352-5 Steel gate valves, isomorphs series.
DIN 3352-13 Double-socket cast iron gate valves, with elastomeric obturator seat and inside screw stem.
DIN 3500 PN 10 piston type gate valves for use in drinking water supply systems.
DIN 86720 Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16.
Globe Valves
DIN 3356-1 Globe valves; General data.
DIN 3356-2 Globe valves; Cast iron stop valves.
DIN 3356-3 Globe valves; Unalloyed steel stop valves.
DIN 3356-4 Globe valves; High temperature steel stop valves.
DIN 3356-5 Globe valves; Stainless steel stop valves.
Non-Return Valves (Check Valves)
DIN 86252 Non return valves for shipboard use, cut off type, of cast iron, with flanges, DN 15 to 500.
DIN 86260 Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500.
DIN 86261 Non return valves for shipboard use, cut off type, of gun metal, with flanges, DN 15 to 500.
Plastic Valves
DIN 3441-1 Unplasticized polyvinyl chloride (PVC-U) valves; requirements and testing.
DIN 3441-2 Unplasticized polyvinyl chloride (PVC-U) valves; ball valves; dimensions.
DIN 3441-3 Unplasticized polyvinyl chloride (PVC-U) valves; diaphragm valves; dimensions.
DIN 3441-4 Valves of Rigid PVC (Unplasticized or Rigid Polyvinyl Chloride); Y-valves (Inclined-seat Valves), Dimensions.
DIN 3441-5 Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions.
DIN 3441-6 Unplasticized polyvinyl chloride (UPVC) valves; gate valves with inside screw stem; dimensions.
DIN 3442-1 Polypropylene (PP) valves; requirements and testing.
DIN 3442-2 Fittings of PP (Polypropylene); Ball valves, Dimensions.
DIN 3442-3 Polypropylene (PP) valves; diaphragm valves; dimensions.
DIN 3543-3, Publication date:1978-07 PVC tapping valves for plastic pipes; dimensions.
DIN 3544-1 High-density polyethylene (HDPE) valves; tapping valves; requirements and test.
DIN EN 28233 Thermoplastics valves; torques; test method (ISO 8233:1988).
DIN EN 917 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak-tightness.
DIN EN 1680 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism.
DIN EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996.
DIN EN 28233 Thermoplastics valves; torques; test method (ISO 8233:1988).
Safety Valves
DIN 3320-1 Safety valves; safety shut-off valves; definitions, sizing, marking.
DIN 3320-3 (Draft standard) Safety valves; safety shut-off valves; centre for face dimensions of flanged safety valves to PN 40 and to DN 250 inlet.
Shutoff Valves
DIN 19208 Flow measurement; mating dimensions and application of shut-off valves for differential pressure transducers and differential pressure piping.
DIN 32509 Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests.
DIN 86251 Shut off valves for shipboard use, of cast iron, with flanges, DN 15 to 500.
Tapping Valves
DIN 3543-1 Metal tapping valves; requirements, testing.
DIN 3543-2 Metallic tapping stop valves; dimensions.
DIN 3543-3, Publication date:1978-07 PVC tapping valves for plastic pipes; dimensions
DIN 3543-4 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions.
DIN 3544-1 High-density polyethylene (HDPE) valves; tapping valves; requirements and test.
Gas Valves
DIN 477-1 Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets.
DIN 477-4 Compressed gas cylinder valves; swing check valves for camping-cylinders.
DIN 477-5 Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections.
DIN 477-6 Gas cylinder valves; test pressures 300 bar and 450 bar, with cylindrical thread for valve stem and gas cylinder neck for breathing apparatus; sizes, threads.
DIN 477-9 (Draft standard) Gas cylinder valves, for highest grade gases; sizes, connections, threads.
DIN 3381 Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices.
DIN 3399 Gas low-pressure cut-off valves; safety requirements, testing.
DIN 3535-1 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests.
DIN 3535-5 Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work.
DIN 3535-6 Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibers, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains.
DIN 3537-1 Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing.
Stop Valves, Anti-Flooding Valves
DIN 19578-1 Stop valves for site drainage systems; anti-flooding valves for faucal sewage systems; requirements.
Non-Return Flaps (Storm Valves)
DIN 87101, Publication date:2003-10 Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10.
Water Valve
DIN 20042 Water valve, nominal pressure 40 - Dimensions and requirements.
Throttle Valves
DIN 42560 Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing.
Charging Valves
DIN 74279 Air braking systems - Charging valves.
Screwed Bonnet Valves
DIN 86501 Valves, screwed bonnet type of gun metal with 24�-connection with port end W according to DIN 3861.
DIN 86528 Tab washers for screwed bonnet valves.
DIN 86552 Valves, screwed bonnet type of steel with 24½-connection with port end W according to DIN 3861.
Sniffle Valves
DIN 87901 Sniffle valves for pumps.
Dimensions
DIN 475-1 Widths across flats for bolts, screws, valves and fittings.
DIN 475-2 Wrench and socket openings.
DIN 3202-4 Face-to-face and center-to-face dimensions of valves; Valves with female thread connection.
DIN 3202-5 Face-to-face and center-to-face dimensions of valves; valves for connection with compression couplings.
DIN 3852-1 Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions.
DIN 3852-2 Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions.
DIN 3852-11 Stud ends and tapped holes for use with compression couplings, valves and screw plugs - Type E stud end dimensions.
DIN EN 558-1 Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems - PN designated valves.
DIN EN 558-2 Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems - Class-designated valves.
Testing
DIN 3230-3 Technical delivery conditions for valves; Compilation of test methods.
DIN 3230-4 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing.
DIN 3230-5 Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing.
DIN 3230-6 Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids.
Castings
DIN 1690-10 Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves.
Materials
DIN 3339 Valves; body component materials.
Corrosion Protection
DIN 30677-1 Corrosion protection of buried valves; coating for normal requirement.
DIN 30677-2 External corrosion protection of buried valves; heavy-duty thermoset plastics coatings.
Terminology
DIN EN 736-1 Valves - Terminology - Types of valves.
DIN EN 736-2 Valves - Terminology - Part 2: Definition of components of valves.
DIN EN 736-3 Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001.
Flanges
DIN EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated.
DIN EN 1092-2 Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges.
DIN EN 1092-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges.
Valves for drinking water, pipe interrupters, pipe disconnectors, & anti-vacuum valves
DIN 3266-1 Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves.
DIN 3266-2 Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing.
Water Supply Systems
DIN 3475 Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing.
DIN 3476 Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings - Requirements and testing.
DIN 3502 Stopvalves for drinking water supplies on and in private property; straight pattern globe valves with oblique bonnet, rated for nominal pressure PN 10.
DIN 3512 Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW.